What You’ll Need for Installation

Before climbing up to begin the setup, let’s gather the necessary tools and components to ensure a smooth workflow:

• ULTI Bar+ roof bars kit (Ford Transit Connect specific)
• Necessary basic hand tools (spanners, screwdrivers, and Allen keys as specified in your kit)
• A step ladder and a clean, well-lit working area

Once your workspace is prepped, let’s dive into the step-by-step installation process.

1. Assessing the Van Roof

Start by examining the roof of your Ford Transit Connect to identify the optimal placement for the roof bars. Take note of the factory-drilled mounting points and ensure the roof surface is clear of any dirt or debris that might interfere with a flush fit.

2. Preparing the ULTI Bar+ Kit

Unbox and lay out all the components of the ULTI Bar+ kit. Check your parts list to ensure every bracket, bolt, and bar is accounted for and ready to go. Crucial step: Make sure you thoroughly read the official manufacturer instructions before tightening any hardware.

3. Locating the Mounting Points

Locate and carefully pop off the plastic mounting point covers on your van’s roof. This will expose the threaded attachment holes specifically designed by Ford for installing aftermarket roof racks.

4. Fitting the Roof Brackets and Bars

Position the base roof brackets over the exposed mounting points and insert the provided hardware. To guarantee a snug and stable fit, you will need to secure and tighten the bolts from the inside of the van. Once the brackets are firmly anchored to the roof, place the ULTI bars across them, aligning them evenly on both sides before locking them down into their final position.

5. Adding Load Stops

Slide and attach the included load stops to the upper channels of the bars. These are essential safety accessories designed to prevent your cargo from shifting or sliding laterally during transportation.

6. Final Measurement and Safety Check

Before loading up your van, perform a final measurement check. Ensure that the roof bars are perfectly parallel, properly aligned, and tightly fastened. Give the bars a firm shake to verify there is no play or rattling in the hardware.

Ready for the Road

By following these steps and referencing the accompanying images, you can successfully and safely install ULTI Bar+ roof bars on your Ford Transit Connect van. With your new roof rack system fully operational, you’ll be ready to tackle demanding hauling needs and optimize your daily workflow with complete confidence. Happy driving!

Need further assistance or advice on outfitting your commercial van? Please don’t hesitate to contact our team at sales@vanroofrack.co.uk or leave a comment below!

The post Fitting a set of Van Guard ULTI Bar+ roof bars to a Ford Transit Connect appeared first on Commercial Vehicle News.

ID Buzz and the ID Buzz Cargo

Whether you are looking to embark on a van life expedition, support a growing family or want to make use of an eco-conscious commercial vehicle the Volkswagen ID Buzz is an excellent choice.

Whatever the use case for this great electric van, one great way to extend the carrying capacity of this van is through the addition of strong load-bearing Rhino roof bars. The Rhino roof bars are extremely aerodynamic, minimise wind noise and have a stylish finish. The Rhino Roof bars are available in both Steel and Aluminium. Aluminium bars are additionally bundled with free load stops.

Volkswagen T7 Multivan

Following on from the T5 and T6, Volkswagen has launched the T7. We are able to supply both steel and aluminium roof bars for this awesome new van.

Fitting

If you need a fitting service to fit the roof bars to your van we’d be more than happy to help you out. Our Salford-based workshop can cater for all makes and models of vans.

Customer Support

If you are interested in the Rhino roof bars for the ID Buzz or T7 Multivan and have questions, we’d be more than happy to help you out. Please contact us at our dedicated sales inbox sales@vanroofrack.co.uk or call us on 07719727453

Volkswagen T5 and T6, Caddy and Crafter

Before we sign off this update it’s worth mentioning that we can also supply Rhino roof bars for other types of Volkswagen vans, both old and new. Check out our T5, T6, Caddy and Crafter options.

The post Cargo Storage for Next-Generation Volkswagen Vehicles appeared first on Commercial Vehicle News.

One of the most common questions we receive is how to fit a roof rack to a Ford Transit Custom High Roof (H2). Unlike the standard H1 model, the H2 doesn’t have obvious roof rack fixing points visible on the roof, which can leave owners wondering where the roof rack should be mounted.

The good news is that Ford has already marked the correct mounting positions for you. Every Ford Transit Custom H2 is equipped with six factory-marked mounting locations built into the roof structure, making it possible to safely fit vehicle-specific roof bars and roof racks.

Where Are the Roof Rack Mounting Points on a Ford Transit Custom H2?

The Ford Transit Custom High Roof (H2) uses six reinforced roof rack mounting points. These are identified by small circular dimples pressed into the roof panel during manufacture.

There are three mounting positions on each side of the roof. These dimples indicate exactly where compatible roof rack systems should be installed.

At first glance it can appear that you’ll need to measure up the roof and determine the fixing locations yourself, but the factory dimples remove the guesswork and ensure the roof rack is positioned correctly.

Do You Need to Drill a Ford Transit Custom H2 Roof?

Yes. Most Ford Transit Custom H2 roof rack systems require drilling at the six factory-marked mounting positions. The reinforced fixing locations are designed specifically for this purpose and are used by manufacturers such as Rhino Products and Van Guard.

All compatible roof racks and roof bars are supplied with vehicle-specific fitting kits and detailed installation instructions, making it straightforward to locate and prepare the fixing points correctly.

Ford Transit Custom H2 Roof Racks and Roof Bars

We supply a wide range of roof bars and roof racks specifically designed for the Ford Transit Custom 2013-2023 High Roof (H2).

Whether you’re looking for lightweight roof bars for ladders and pipe carriers or a full aluminium roof rack with a rear roller, we stock solutions from leading manufacturers including Rhino Products and Van Guard.

Suitable for L1 H2 and L2 H2 Models

Our range includes roof racks and roof bars for both:

• Ford Transit Custom L1 H2 (Short Wheelbase High Roof)
• Ford Transit Custom L2 H2 (Long Wheelbase High Roof)

Each system is designed specifically for the H2 roof profile and supplied with the correct brackets, fixings and instructions for installation.

Ford Transit Custom H2 Fitting Instructions

If you would like to review the installation process before purchasing, the following fitting instructions are available to download.

• Rhino Ford Transit Custom L1 H2 Aluminium Roof Rack Instructions
• Rhino Ford Transit Custom L2 H2 Aluminium Roof Rack Instructions
• Van Guard Ford Transit Custom L1 H2 ULTI Rack Instructions
• Van Guard Ford Transit Custom L2 H2 ULTI Rack Instructions

Frequently Asked Questions

How many mounting points does a Ford Transit Custom H2 have?

A Ford Transit Custom High Roof (H2) has six roof rack mounting locations, identified by dimples in the roof panel. There are three fixing positions on each side of the roof.

Can I fit roof bars to a Ford Transit Custom High Roof?

Yes. Both roof bars and full roof racks are available for Ford Transit Custom H2 models. The correct choice depends on the type of equipment and materials you need to carry.

Do all Ford Transit Custom H2 roof racks use the same mounting points?

Compatible roof rack systems from Rhino Products and Van Guard use the factory-marked mounting positions provided by Ford on the H2 roof.

Need Help Choosing the Correct H2 Roof Rack?

If you’re unsure which roof rack or roof bar system is suitable for your van, our team can help.

Browse our full range of Ford Transit Custom High Roof (H2) Roof Racks or contact us at sales@vanroofrack.co.uk for advice.

The post Ford Transit Custom H2 Mounting Points | High Roof Roof Rack Fitting Guide appeared first on Commercial Vehicle News.

When outfitting a commercial vehicle with roof bars or a full roof rack, there is one essential accessory that often gets overlooked: the rear roller. If you want to keep your fleet in pristine condition while significantly speeding up your daily loading and unloading times, adding a heavy-duty van rear roller is a must-have upgrade.

1. Protect Your Van from Costly Damage

Loading heavy materials, timber, or extension ladders from the back of a vehicle is the easiest way to cause accidental cosmetic damage. Without a rear ladder roller, lifting items high enough to clear the roof edge is a physical struggle. Inevitably, cargo scrapes and dents the rear doors and roof line. This doesn’t just look untidy—it scratches through the paintwork, exposing bare metal to the elements and leading to rust. A roller protects your van’s resale value by providing a smooth, safe pivot point for your cargo.

2. Save Time, Energy, and Physical Strain

A rear roller transforms loading into a seamless, one-person job. Instead of awkwardly lifting and shuffling bulky items across your roof bars, the roller allows materials to slide effortlessly into position. Whether you are handling heavy sheet materials or long pipes, a roller drastically reduces physical strain on the job site, prevents injuries, and gets you moving to your next destination much faster.

3. Simple, Straightforward Installation

Fitting a rear roller to your existing setup is incredibly easy and typically takes around 30 minutes. However, it is important to note that rollers are manufacturer-specific and vehicle-model-specific. For instance, if you have Rhino roof bars, you will need a matching Rhino rear roller tailored to your exact van model to ensure a secure, perfect fit.

To complete the installation, you generally only need basic hand tools:

• 10mm spanner or socket
• 13mm spanner or socket

Find the Right Rear Roller for Your Setup

vanroofrack.co.uk supplies professional-grade Rhino and Van Guard rear rollers alongside premium roof bars for all major van makes and models in the UK.

Unsure which roller matches your current roof rack configuration? Our expert team is here to help you identify the exact fit for your commercial vehicle. Get in touch with us via email at sales@vanroofrack.co.uk

The post Rear Rollers appeared first on Commercial Vehicle News.